Finish Line

DRY Lube is especially recommended for riding on or off-road in dry, dirty, dusty environments.
Minimizes pedaling friction, repels moisture, and withstands rides up to 100 miles.

Formulated with sub-micron ceramic particles, Teflon fluoropolymer and premium synthetic oils. As bearings become coated with the Teflon and ceramic particles, friction and heat is dissipated. Bearings last longer and run quieter and smoother.

Finish Line fully waterproof bicycle grease

Removes dirt and oil residue off rotors and pads.
Cleans rotors and pads for better braking power.
Cleans braking surfaces to help prevent squeal.
Displaces water from braking components.

Kevlar fibers and natural latex work synergistically resulting in faster, stronger seals, reduced air loss and maximum durability/reliability. Lightweight, low viscosity formula seals quickly and is long lasting for less top offs.

Five different cleaning agents and three different rust inhibitors clean and protect your bike. Two different rust and oxidation inhibitors protect metal surfaces and prevent flash rusting. Safe for all surfaces. Biodegradable and non-toxic.

Finish Line`s Dry Lube goes on wet and sets up with a dry `wax-like` synthetic film that helps keep your chain clean by not absorbing excessive amounts grit, grime, or dust. Dry Lube is especially recommended for riding on or off-road in dry environments.

Finish Line e-Bike Cleaner™ is formulated to safely remove grime before it migrates into your e-Bike`s electrical components. Non-caustic and requires no rinsing with water which could cause electrical problems

E-Shift Groupset Cleaner can quickly and safely clean the grit, grime, and old lubricant from any electronic groupset. E-Shift quickly evaporates with no water rinsing. Compatible with all brands of electronic groupsets, components and connections.

Formulated specifically for bicycle brake systems. Compatible with all mineral oil brake systems including Shimano and Magura. Provides maximum fluid life and braking performance, even at low temperatures.

Totally repels water.</br>Will require more attention to drivetrain cleanliness.</BR>Upon application, wipe excess off chain to minimize attraction of dirt and grime.

Extreme pressure additives withstand extreme torque and pressure associated with electric assist drivetrains.Dry style lubricant sheds direct and grime to keep chain running clean and smooth.

Grease gun makes application precise and neat.<br/><strong>Recommended for used with Finish Line teflon grease to service Native and Jackson watercraft pedal drive units. </strong>

Polymers prevents washout and water emulsification. Prevents rust and corrosion even in saltwater.

Finish Line`s Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Finish Line oils will work with any brake brand that uses mineral oil.

A wet style lube that goes on wet and stays wet, for maximum performance in wet weather and over long distancesFor hi-torque pedaling over ultra-long distancesCompletely repels water

Fights friction and stiction! Improves suspension performance and conditions/protects seals and O-rings. Specialized polysiloxane and advanced flouropolymers. Keep your squish running smooth between services with this spray.

A dry style lube that goes on wet , but then sets up dry in a paste-like consistency to resist attracting and absorbing dirt for maximum performance in typical cycling conditionsSynthetic oils with Teflon for super slick, long-lasting performanceMost vers

Specifically engineered for use in bicycle brake systems and is compatible with all current brakes. It has a super low viscosity that provides great lever response, pad retraction, and consistent performance through a full range of operating temperatures.

Fiber Grip is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. Eliminates the need to over tighten clamps to achieve secure connections. Tested and approved by leading carbon fiber component manufacturers.